Air-Coupled Ultrasonic Ferroelectret Receiver With Additional Bias Voltage

• Published in: IEEE transactions on ultrasonics, ferroelectrics, and frequency control Vol. 66; no. 10; pp. 1600 - 1605
• Main Authors: Gaal, Mate, Caldeira, Rui, Bartusch, Jurgen, Schadow, Florian, Vossing, Konrad, Kupnik, Mario
• Format: Journal Article
• Language: English
• Published: United States IEEE 01.10.2019; The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
• Subjects: Acoustic coupling; Acoustic impedance; Acoustic noise; Acoustic sensors; Acoustics; Bias; Electronics; ferroelectret; ferroelectric materials; Glulam; Materials testing; Noise levels; Nondestructive testing; Piezoelectricity; Plasma; Receivers; Rotor blades; Sensitivity; Sensors; Signal to noise ratio; Transducers; Transmitters; ultrasonic imaging; Ultrasonic testing; ultrasonic transducers; Voltage measurement
• ISSN: 0885-3010; 1525-8955
• DOI: 10.1109/TUFFC.2019.2925666

High sensitivity is an important requirement for air-coupled ultrasonic sensors applied to materials testing. With a lower acoustic impedance than any piezoelectric material, charged cellular polypropylene (PP) offers better matching to air with a similar piezoelectric coefficient. The piezoelectric properties of charged cellular PP originate from their polarization, creating permanent internal voltage. The sensitivity of the sensor can be increased by applying additional dc bias voltage, as it has been done already for transmitters. This work presents the first ultrasonic sensor based on charged cellular PP including a high-voltage module providing dc bias voltage up to 2 kV. This bias voltage led to an increase in the signal-to-noise ratio of up to 15 ± 1 dB. The measurement of the received signal depending on the applied bias voltage is proposed as a new method of determining the internal voltage of ferroelectrets. The sensor combined with a cellular PP transmitter was applied to nondestructive testing of a rotor blade segment and glued-laminated timber, enabling imaging of the internal structure of these specimens with a thickness around 4 cm.