Nanoporous silver cathode surface-treated by aerosol-assisted chemical vapor deposition of gadolinia-doped ceria for intermediate-temperature solid oxide fuel cells

• Published in: Journal of power sources Vol. 402; pp. 246 - 251
• Main Authors: Choi, Hyeon Rak, Neoh, Ke Chean, Choi, Hyung Jong, Han, Gwon Deok, Jang, Dong Young, Kim, Daejoong, Shim, Joon Hyung
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 31.10.2018
• Subjects: Aerosol-assisted chemical vapor deposition; Cathode; Gadolinia-doped ceria; Silver; Solid oxide fuel cells; Silver; Solid oxide fuel cells; Aerosol-assisted chemical vapor deposition; Cathode; Gadolinia-doped ceria
• ISSN: 0378-7753; 1873-2755
• DOI: 10.1016/j.jpowsour.2018.09.031

Herein, a nanoporous silver surface treated with gadolinia-doped ceria (GDC) is evaluated as a cathode for intermediate-temperature solid oxide fuel cells operating below 500 °C. For uniform surface treatment on the porous silver, aerosol-assisted chemical vapor deposition (AACVD) is used; it is a non-vacuum process and is considered as an economical alternative to the expensive vacuum-environment thin-film fabrication methods. Consequently, a uniform coating of AACVD GDC on the Ag surface is successfully achieved, which is confirmed by high-resolution transmission electron microscopy. The optimized amount of AACVD GDC enhances fuel cell performance compared to cells with bare Ag, in terms of the power and long-term stability measured by current–voltage characteristics, electrochemical impedance spectroscopy, and potentiostatic amperometry. This performance is even more significant than that from the cell with a platinum cathode, which, to our best knowledge, is known as the best-performing catalyst for solid oxide fuel cells in the intermediate- and low-temperature regimes. The power enhancement is attributed to the improved kinetics with the GDC surface coating; moreover, this oxide decoration is proven effective in preventing the thermal agglomeration of Ag, as confirmed by the morphology comparison before and after the long-term test. •Nanoporous Ag was uniformly coated by gadolinia-doped ceria using AACVD technique.•The optimal coating improves the performance of Ag to a level similar to that of Pt.•The surface oxides prevent Ag thermal agglomeration and improve long term stability.