In-situ diagnosis on performance degradation of high temperature polymer electrolyte membrane fuel cell by examining its electrochemical properties under operation

• Published in: International journal of hydrogen energy Vol. 43; no. 45; pp. 21006 - 21016
• Main Authors: Yao, Dongmei, Jao, Ting-Chu, Zhang, Weiqi, Xu, Li, Xing, Lei, Ma, Qiang, Xu, Qian, Li, Huaming, Pasupathi, Sivakumar, Su, Huaneng
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 08.11.2018
• Subjects: Electrochemical impedance spectroscopy; High temperature proton exchange membrane fuel cell; In-situ diagnosis; Performance degradation; Tafel analysis; High temperature proton exchange membrane fuel cell; In-situ diagnosis; Tafel analysis; Performance degradation; Electrochemical impedance spectroscopy
• ISSN: 0360-3199; 1879-3487
• DOI: 10.1016/j.ijhydene.2018.09.103

Ex-situ electrochemical characterization techniques could significantly alter or misrepresent the materials of high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) to the point where they are not reflective of their conditions during operation, resulting in difficulties in obtaining realistic fuel cell durability. To minimize this disturbance, we proposed an in-situ low-invasive technique of electrochemical impedance spectroscopy (EIS), combining with polarization curve and Tafel slope analysis, to investigate the performance degradation of HT-PEMFC. The membrane electrode assemblies (MEAs) used in the HT-PEMFC were lab-made but with commercial catalyst and poly(2,5-benzimidazole) (ABPBI) membrane. Two common test modes, i.e. steady-state operation and dynamic-state operation, were employed to mimic practical HT-PEMFC operation. By examining the changes of electrochemical properties of the HT-PEMFC under steady- or dynamic-state operation, the main mechanism for the performance degradation can be determined. The results from the study suggests that a high cell performance decay rate cannot be directly attributed to materials degradation, especially in a short-term steady-state operation. In contrast, the change of Tafel slope can be seen as a clear indicator to determine the extent of catalyst degradation of HT-PEMFC, no matter which test protocol was applied. Post-analysis of TEM on the catalysts before and after tests further confirmed the main mechanism for the performance losses of the HT-PEMFCs underwent two test protocols, while acid loss and membrane degradation were considered to be negligible during the short-term tests. •In-situ diagnosis on performance degradation of HT-PEMFC was proposed.•Low-invasive EIS, polarization test and Tafel slope analysis were employed.•Decay mechanism can be detected by examining the change of electrochemical properties.•High performance decay rate cannot be directly accounted for metatrails degradation.•Tafel slope can be seen as a clear indicator for catalyst degradation.