Optimization of corona electrode position in roll-type electrostatic separators

• Published in: IEEE transactions on industry applications Vol. 41; no. 2; pp. 527 - 534
• Main Authors: Samuila, A., Urs, A., Iuga, A., Morar, R., Aman, F., Dascalescu, L.
• Format: Journal Article
• Language: English
• Published: New York IEEE 01.03.2005; The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
• Subjects: Charge; Charge measurement; Corona; Corona discharge; corona electrode; Coronas; design of experiments; Electrodes; electrostatic separation; Electrostatic separators; Electrostatics; Granular materials; Laboratories; Optimization; Particle separators; process optimization; Response surface methodology; Rolls; Separation; superficial charge simulation method; Surface charging; Testing; Wire
• ISSN: 0093-9994; 1939-9367
• DOI: 10.1109/TIA.2005.844859

The position of the corona electrode(s) is known to be a key factor of electrostatic separation efficiency, as it influences both the charging conditions of the granular materials on the surface of the roll electrode connected to the ground, and the magnitude of the electric forces exerted on the particles. Response surface methodology was employed for the design of the experiments performed on a laboratory roll-type corona-electrostatic separators, with samples of chopped electric wire wastes typically processed by such techniques. The results of the electrostatic separation tests are discussed in relation to the data obtained from two other experiments, in which corona current and particle charge measurements were performed for various positions of the standard wire-type electrode. The conclusions of this study enabled the formulation of several recommendations for the improvement of the outcome of industrial separation processes (i.e., maximize the weight percentage as well as the purity of the recovered materials).