Reasonable location parameters of pick and nozzle in combined cutting system

• Published in: Journal of Central South University Vol. 21; no. 3; pp. 1067 - 1076
• Main Authors: Zeng, Rui, Du, Chang-long, Chen, Rong-jun, Wang, Wen-juan
• Format: Journal Article
• Language: English
• Published: Heidelberg Central South University 01.03.2014
• Subjects: Engineering; Metallic Materials; hard coal-rock; location parameter; water jet; combined cutting; mining seepage theory
• ISSN: 2095-2899; 2227-5223
• DOI: 10.1007/s11771-014-2038-9

The drum shearer and high pressure water jet combined cutting system is an effective technology to cut hard coal-rock, but one problem of the technology is the choice of pick and nozzle location parameters. In order to solve the problem, the process and mechanism of combined cutting are studied and mining seepage catastrophe theory is used to construct the mathematic and physical model of combined cutting hard coal-rock. Based on the model and detailed analysis of combined cutting mechanism, the single pick and nozzle combined cutting test-bed is built to test the main pick and nozzle location parameters of drum shearer and water jet combined cutting system. Test results show that the best vertical distance between the pick-tip and nozzle center point is the sum of cutting thickness and proper target distance in the Y axial direction; the best horizontal distance is the length between pick-tip point and coal-rock surface bursting crack point in the X axial direction. The best incident angle of water jet should be the same as the bursting crack line’s angle in theory, but considering other important factors comprehensively, it is more reasonable when the incident angle of water jet is 90 °.