Hydrogen production by steam reforming of methane over nickel based structured catalysts supported on calcium aluminate modified SiC

• Published in: International journal of hydrogen energy Vol. 44; no. 38; pp. 21010 - 21019
• Main Authors: Noh, Young Su, Lee, Kwan-Young, Moon, Dong Ju
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 09.08.2019
• Subjects: Calcium aluminate; Catalyst shaping; Hydrogen; SiC; Steam reforming of methane; Thermal conductivity; Thermal conductivity; Catalyst shaping; Calcium aluminate; SiC; Hydrogen; Steam reforming of methane
• ISSN: 0360-3199; 1879-3487
• DOI: 10.1016/j.ijhydene.2019.04.287

Steam reforming of methane (SRM) is an immensely important process for the production of hydrogen and syngas (H2, CO). Ni-based alumina supported catalysts are conventionally used in the SRM process, but the coke formation and sintering are still challenging problems to develop an economical process. It was reported that the Lewis basicity of the support obviously plays a crucial role to prevent the coke formation, and basic supports such as calcium aluminate (CAx) has shown superior resistance for carbon deposition, but in case of CAx the major drawback is low thermal conductivity. In this work, in order to improve the catalytic performance of SRM, the Nickel based structured catalysts supported on the modified calcium aluminate (CAx) with silicon carbide (SiC) were prepared. All synthesized catalysts were characterized by various techniques including N2-physisorption, XRD, H2-TPR, XPS, CO2-TPR, TGA, TPH, and thermal conductivity analysis. It was found that the CAx play an important role obtaining higher hydrogen yield and improved resistance to the carbon deposition. Even though, the methane conversion and H2 yield efficiency for Ni supported on SiC modified CAx/Al2O3 (NASC) catalyst was slightly lower than NAS and NAC catalysts, which caused by the weak interaction of active metal, but the NASC catalyst showed superior resistance to the coke formation compared to other catalysts. It was concluded that NASC catalysts is a promising candidates for the production of hydrogen by the steam reforming of methane. [Display omitted] •Granule type Ni/Al2O3 catalysts modified with SiC and Ca aluminate were prepared.•Using SiC and Ca aluminate with Al2O3 had improved the coke resistance of catalyst.•SiC & Ca aluminate addition to support affected metal dispersion and surface area.•The support modification enhanced the thermal conductivity and surface basicity.