Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials

• Published in: Ceramics international Vol. 43; no. 16; pp. 13264 - 13275
• Main Authors: Terzić, Anja, Obradović, Nina, Stojanović, Jovica, Pavlović, Vladimir, Andrić, Ljubiša, Olćan, Dragan, Đorđević, Antonije
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.11.2017
• Subjects: A. Sintering; B. Electron microscopy; B. Microstructure-final; B. X-ray methods; C. Dielectric properties; D. MgO; E. Insulators; B. X-ray methods; B. Electron microscopy; A. Sintering; B. Microstructure-final; E. Insulators; C. Dielectric properties; D. MgO
• ISSN: 0272-8842; 1873-3956
• DOI: 10.1016/j.ceramint.2017.07.024

The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated from a low-cost raw material, i.e. talc. The changes, induced by the alternations of the binders (bentonite, kaolin clay) and fluxing agents (BaCO3, feldspar), were monitored in the temperature range 1000° to 1250°C in which complete densification and re-crystallization of the investigated structures were accomplished. The critical points in the synthesis of steatite materials were assessed by instrumental analyses. Crystallinity changes and mineral phase transition during sintering were monitored by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy accompanied with EDS mapping. The thermal stability was observed on the green mixtures using differential thermal and thermo gravimetric analyses. Electrical measurements recorded variations of the dielectric constant (εr) and loss tangent (tanδ) as a function of the sintering temperature. The investigation highlighted critical design points, as well as the optimal combinations of the raw materials for production of the steatite ceramics for advanced electrical engineering applications.