Experimental and analytical investigation on flexural behaviour of ambient cured geopolymer concrete beams reinforced with steel fibers

• Published in: Engineering structures Vol. 200; p. 109707
• Main Authors: Tran, Tung T., Pham, Thong M., Hao, Hong
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 01.12.2019; Elsevier BV
• Subjects: Ambient cured; Analytical solution; Concrete; Ductile-brittle transition; Ductility; Fibers; Geopolymer concrete; Investigations; Reinforcing steels; Steel; Steel fiber; Steel fibers; Workability; Steel fiber; Ambient cured; Analytical solution; Geopolymer concrete
• ISSN: 0141-0296; 1873-7323
• DOI: 10.1016/j.engstruct.2019.109707

•Distinctive behaviour of GPC beams versus ordinary Portland Concrete (OPC) beams.•Effect of steel fiber on the flexural behaviour of GPC beams.•Analytical procedure to estimate the load-deflection curve of FRC beams. This study investigates the flexural behaviour of geopolymer concrete (GPC) beams reinforced with steel fibers. The effects of the volume fraction and fiber length on the flexural behaviour of GPC beams are investigated. The distinctive behaviour of GPC beams versus ordinary Portland Concrete (OPC) beams is identified and discussed. Based on the experimental results, the GPC beams reinforced with steel fibers showed great improvement in the cracking resistance, serviceability, and ductility compared to the reference beams. The GPC beam without steel fibers failed in a very brittle manner while those reinforced with steel fibers experienced ductile failure. The load capacity of the GPC beams increased with the volume fraction of steel fiber up to 0.75%. Further increasing the fiber content to 1.5% showed a deterioration in the flexural behavior due to poor workability of GPC leading to worse fiber dispersion and orientation. The increase of fiber length up to 60 mm did not improve the moment capacity of the GPC beams owing to premature fiber fracture. An analytical procedure was proposed to estimate the load-deflection curve of the tested beams with good correlation between predictive and experimental results.