Reinforcing effect of surface-modified steel fibers in ultra-high-performance concrete under tension
The direct tensile behavior of ultra-high-performance surface-modified steel fiber-reinforced concrete was evaluated in this study. Various chemical modifications were applied to steel fibers, including acetone washing, hydrochloric acid washing, zinc phosphating, silica coating, and chelation using...
Saved in:
Published in | Case Studies in Construction Materials Vol. 16; p. e01125 |
---|---|
Main Authors | , , |
Format | Journal Article |
Language | English |
Published |
Elsevier Ltd
01.06.2022
Elsevier |
Subjects | |
Online Access | Get full text |
Cover
Loading…
Summary: | The direct tensile behavior of ultra-high-performance surface-modified steel fiber-reinforced concrete was evaluated in this study. Various chemical modifications were applied to steel fibers, including acetone washing, hydrochloric acid washing, zinc phosphating, silica coating, and chelation using an ethylenediaminetetraacetic acid (EDTA) electrolyte solution, which improved the tensile strength, tensile strain, and g-value to a maximum of 17.76 MPa, 1.22%, and 144.51 kJ/m3, respectively. Acetone washing and EDTA chelating were the most effective methods for improving the tensile strength, whereas silica coating was the best for improving the strain capacity and energy absorption capacity. The optimal treatment time for EDTA chelation treatment was approximately 6 h, and the tensile performance decreased considerably after 12 h of treatment. Comparing these results with those of pullout experiments revealed that a high shear stress should be maintained after the fiber has fully debonded to effectively enhance the post-cracking tensile performance.
•Steel fibers with chemically treated surfaces had a significant effect of UHPC.•Acetone washing increases the tensile strength most effectively by 19%.•Silica coating improves strain and energy absorption capacity the most at 36% and 37%.•EDTA chelating improves the tensile strength by roughening the surface up to 6 h.•High shear stress of single fiber enhances the post-cracking behavior of composites. |
---|---|
ISSN: | 2214-5095 2214-5095 |
DOI: | 10.1016/j.cscm.2022.e01125 |