Experimental analysis of a novel confined bed system for thermal energy storage

• Published in: Journal of energy storage Vol. 69; p. 107972
• Main Authors: Soria-Verdugo, A., Guil-Pedrosa, J.F., Hernández-Jiménez, F., García-Gutiérrez, L.M., Cano-Pleite, E., García-Hernando, N.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.10.2023
• Subjects: Confined bed; Granular material; TES; Thermocline; Thermocline; TES; Granular material; Confined bed
• ISSN: 2352-152X; 2352-1538
• DOI: 10.1016/j.est.2023.107972

Thermal energy storage (TES) is an essential subsystem for the uniform operation of concentrated solar power (CSP) plants. A sensible heat storage system based on a novel confined bed of small particle size granular material was experimentally evaluated. The bed of regular silica sand was mechanically confined between a bottom and a top perforated plate gas distributor, to prevent the motion of particles even for gas velocities above the minimum fluidization velocity of the solids, operating the bed under a fixed or packed bed regime. The discharge process of the confined bed was experimentally analyzed, preheating the granular material at 300–320 °C and supplying various volumetric flow rates of cold air through the bottom distributor. During the discharge process, the temperature of the bed was segregated, obtaining a high temperature zone at the top region and a low temperature zone at the bottom region of the bed. These regions are separated by a thermocline that evolves in the upwards direction as the discharge process progresses. The temperature distribution in the bed and the total pressure drop of the TES system were monitored during the tests. For all cases, the temperature of the bed at different heights evolves as in a fixed bed, confirming the proper confinement of the granular material. The thermocline velocity depends on the volumetric flow rate of cold air, obtaining a discharge time for the temperature located at the exit of the system of around 50, 40, and 30 min for air volumetric flow rates of 700, 900, and 1100 Nlpm, respectively, using 55 kg of regular silica sand as granular material. The experimental results of the evolution and distribution of temperature in the bed were compared with an analytical model of the process for a fixed/packed bed regime of operation, resulting in a good agreement between the experimental measurements and the numerical predictions. •A novel concept of mechanical confinement of granular material was proposed.•The confined bed thermal energy storage system was studied experimentally.•The confined bed operated under a fixed bed regime even at high fluid velocity.•Temperature distribution measurements were in line with analytical model prediction.•The confined bed was proved to supply fluid at maximum temperature during discharge.