Out-of-plane Response of an Innovative Masonry Infill with Sliding Joints from Shaking Table Tests

• Published in: Journal of earthquake engineering : JEE Vol. 26; no. 4; pp. 1789 - 1823
• Main Authors: Milanesi, R. R., Morandi, P., Manzini, C. F., Albanesi, L., Magenes, G.
• Format: Journal Article
• Language: English
• Published: Abingdon Taylor & Francis 12.03.2022; Taylor & Francis Ltd
• Subjects: Columns (structural); Dynamic tests; Earthquake resistance; Formability; Innovative masonry infill; Interface stability; Masonry; out-of-plane response; out-of-plane verification; Redevelopment; Seismic stability; Shake table tests; shaking table test; Sliding; sliding joints; Slumping; Test procedures; Tests
• ISSN: 1363-2469; 1559-808X
• DOI: 10.1080/13632469.2020.1739173

Within the European FP7 Project "INSYSME", the research unit of the University of Pavia has developed a seismic-resistant masonry infill system with original details, which subdivides the masonry panel into horizontal stripes through the insertion of "sliding joints" and deformable joints at the infill-frame interface. The out-of-plane stability is governed by the flexural/arching resistance of the masonry stripes and adequate supports at the RC columns. An extensive experimental campaign has been performed. In this paper, the results of the out-of-plane dynamic tests on shaking-table conducted on the specimens with and without opening are discussed. These types of tests, never applied before on innovative masonry infill typologies, have involved a very demanding testing protocol, constituted of artificial input motions at increasing intensity. To interpret the test results and provide first indications for safety checks, simplified numerical and analytical simulations of the tests have been conducted. According to the out-of-plane experimental performance of this innovative infill system and to the satisfactory in-plane response, the solution appears to be very promising for real applications.