Adsorptive removal of alizarin dye from wastewater using maghemite nanoadsorbents

• Published in: Separation science and technology Vol. 55; no. 14; pp. 2433 - 2448
• Main Authors: Badran, Ismail, Khalaf, Rawan
• Format: Journal Article
• Language: English
• Published: Abingdon Taylor & Francis 21.09.2020; Taylor & Francis Ltd
• Subjects: Adsorption; Adsorptivity; Alizarin; Anthraquinone; Anthraquinone dyes; Aqueous solutions; Color removal; Dyes; Efficiency; Ferric oxide; Free energy; Gibbs free energy; Iron oxides; Nanocatalysis; Nanoparticles; Optimization; Parameters; pH effects; Photodegradation; Regeneration; Regeneration (biological); Removal; Room temperature; Sodium hydroxide; Temperature; Ultraviolet radiation; Wastewater; wastewater treatment
• ISSN: 0149-6395; 1520-5754
• DOI: 10.1080/01496395.2019.1634731

This is an investigation of the adsorptive removal of anthraquinone dyes, resembled by Alizarin, by utilizing maghemite iron oxide (γ-Fe 2 O 3 ) nanoparticles in aqueous media. The adsorption process was affected by several parameters such as solution pH, adsorbent amount, contact time, and temperature. After optimizing the parameters affecting the adsorption, the process was successful in removing Alizarin dye with an efficiency exceeding 95%. Best adsorption results were achieved at a pH of 11 and contact time of 60 min. The adsorption was shown to follow the Langmuir model suggesting a monolayer and homogeneous coverage. The maximum adsorption capacity (q m ) was found to be 23.2 mg/g at pH = 11. A thermodynamic study showed that the adsorption process is exothermic and spontaneous at room temperature. The Gibbs free energy of adsorption (-6.79 kJ/mol) obtained in this study suggests a physisorption process. This finding has facilitated the regeneration of the Fe 2 O 3 nanocatalyst. Both NaOH and HNO 3 at dilute levels were tested for the regeneration of the nanocatalyst. Regeneration with HNO 3 was successful up to four successive removal cycles with an efficiency >80%. Photodegradation experiments utilizing a UV light were also successful in maximizing the adsorption removal efficiency. A sorption mechanism based on the results obtained in this work is also proposed.