Enhanced properties of low-cost carbon black-graphite counter electrode in DSSC by incorporating binders

• Published in: Solar energy Vol. 225; pp. 237 - 244
• Main Authors: Narudin, Nurnajaa, Ekanayake, Piyasiri, Soon, Ying Woan, Nakajima, Hideki, Lim, Chee Ming
• Format: Journal Article
• Language: English
• Published: New York Elsevier Ltd 01.09.2021; Pergamon Press Inc
• Subjects: Binders; Black carbon; Carbon; Carbon black; Carbon-based materials; Catalytic activity; Charge transfer; Circuits; Corrosion resistance; Counter electrodes; Current density; Dye-sensitized solar cells; Electrochemical impedance spectroscopy; Electrochemistry; Electrodes; Energy conversion efficiency; Energy levels; Fabrication; Graphite; Low cost; Photoelectron spectroscopy; Photoelectrons; Photovoltaic cells; Platinum; Scanning electron microscopy; Short circuit currents; Short-circuit current; Solar cells; Solar energy; Spectroscopy; Spectrum analysis; Substrates; Surface area; Titanium; Titanium dioxide; X ray photoelectron spectroscopy; Zirconium; Zirconium dioxide; Dye-sensitized solar cells; Catalytic activity; Binders; Counter electrodes; Carbon-based materials
• ISSN: 0038-092X; 1471-1257
• DOI: 10.1016/j.solener.2021.06.070

•Carbon black/graphite composite (CB/Gr) by incorporating binders was used as counter electrodes (CE) in DSSC.•Various amount of TTIP and ZrO2 binders were tested while keeping constant amount of CB/Gr.•TTIP at 0.100 g added to CB/Gr obtained the highest efficiency of 5.74 %.•CB/Gr:TTIP exhibit high specific surface area, reduced charge transfer resistance, enhanced fill factor.•TTIP forms TiO2 in situ with small particle size. Carbon-based counter electrodes of dye-sensitized solar cells (DSSCs) such as carbon black-graphite composite (CB/Gr) have received unprecedented interest in recent years due to their ease of fabrication, good corrosion resistance, and low cost compared to platinum (Pt) electrodes. However, the poor surface adherence between the carbon counter electrodes (CE) and FTO substrate, low surface area, and poor inter-particle connection between the carbon materials have consistently become a major challenge. In order to overcome these issues, we have fabricated CB/Gr by incorporating binders of titanium (IV) isopropoxide (TTIP), and zirconium (IV) dioxide (ZrO2) as the counter electrodes for the DSSC. The performance of the CE is characterized by four-point probe conductivity measurement, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), and current density voltage (J-V) characteristics. The results revealed that incorporating binders to the CB/Gr has improved the series resistance (RS) and charge transfer resistance (RCT), which enhances the short-circuit current density (JSC), fill factor (FF), and the power conversion efficiency (PCE) of the device. The TTIP binder in CB/Gr CE exhibited superior performance in DSSC is largely attributed to the formation of TiO2 in situ with small particle size of about 100 nm, leading to enhanced intimate contact between the carbon materials, high surface area, and better surface adherence between counter electrode and the FTO substrate. Our findings, thereby, offer the possibility to engineer and optimize the energy levels of CE in an effort to develop a high-performing DSSC counter electrode.