Tunable bead-on-string microstructures fabricated by mechano-electrospinning

• Published in: Journal of physics. D, Applied physics Vol. 45; no. 40; pp. 405301 - 1-8
• Main Authors: Bu, Ningbin, Huang, YongAn, Deng, Huixu, Yin, Zhouping
• Format: Journal Article
• Language: English
• Published: IOP Publishing 10.10.2012
• Subjects: Beads; Capillarity; Contact; Electric contacts; Friction; Horizontal; Microstructure
• ISSN: 0022-3727; 1361-6463
• DOI: 10.1088/0022-3727/45/40/405301

In this paper, bead-on-string microstructures are fabricated by the mechano-electrospinning (MES) process in a continuously tunable manner. The thin jet is pulled onto the substrate by the stable electric field force and tunable mechanical drawing force, and then the bead-on-string structures are generated by means of the force exerted on the jet, which changes from capillary force and resisting viscosity force to friction force at the contact point in the horizontal direction. In a stable bead-on-string formation process, one cycle can be divided into three stages from the point of view of the jet behaviour: being anchored, being stretched, and skipping. The bead size and the bead gap are continuously tunable through the MES process. The fabrication mechanisms of the bead-on-string microstructure are uncovered through theoretical analysis and experimental characterization. When a critical velocity is achieved, the jet directly falls on the substrate without accumulation since the mechanical drawing force in the horizontal direction overtakes the capillary force, which leads the bead-on-string microstructures to a continuous fibre line. It is a flexible and highly controllable method to fabricate bead-on-string microstructures.