Investigation on microstructure development and mechanical properties of large-load and low-speed friction stir welded Cu-30Zn brass joint

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Vol. 726; pp. 169 - 178
• Main Authors: Xu, Nan, Song, Qining, Bao, Yefeng
• Format: Journal Article
• Language: English
• Published: Lausanne Elsevier B.V 30.05.2018; Elsevier BV
• Subjects: Alloy steels; Brass; Brass plating; Copper; Deformation mechanisms; Dislocation density; Ductility; Dynamic recrystallization; Friction stir welding; Grain structure; Heat affected zone; Mechanical properties; Melting points; Microstructure; Recrystallization; Rolling texture; Texture; Titanium base alloys; Twin boundaries; Mechanical properties; Texture; Brass; Friction stir welding; Recrystallization
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2018.04.085

In this work, 2 mm thick Cu-30Zn brass plates were successfully joined by using large-load and low-speed friction stir welding. Heat-affected zone was eliminated due to the significantly improved thermal cycle. The stir zone exhibited ultra-fine grains, with high fraction of twin boundaries and low dislocation density. Also, several nano-scale twin boundaries were introduced into the stir zone. Grain structure refinement in the weld was attributed to the combination of discontinuous, continuous, geometric and shear-band-assisted dynamic recrystallization mechanisms. Consequently, the stir zone showed excellent strength-ductility synergy compared to that of the severe plastic deformed and the conventional friction stir welded Cu-30Zn brass. A feasible one-step strategy was developed herein, to increase the strength of the friction stir welded Cu-30Zn brass joint, while avoiding ductility loss. Moreover, this study offers a new insight and choice for joining metals or alloys with higher melting points, such as steel and titanium alloys.