Evaluation of Polyvinyl Alcohol as Binder during Continuous Twin Screw Wet Granulation

• Published in: Pharmaceutics Vol. 16; no. 7; p. 854
• Main Authors: Denduyver, Phaedra, Birk, Gudrun, Ambruosi, Alessandra, Vervaet, Chris, Vanhoorne, Valérie
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 25.06.2024
• Subjects: binders; Contact angle; continuous manufacturing; formulation optimization; Manufacturing; Molecular weight; Particle size; Polyvinyl alcohol; twin-screw granulation; Viscosity; Water; wet granulation; United Kingdom > UK; France; United States > US; Germany; formulation optimization; continuous manufacturing; twin-screw granulation; binders; polyvinyl alcohol; wet granulation
• ISSN: 1999-4923; 1999-4923
• DOI: 10.3390/pharmaceutics16070854

Binder selection is a crucial step in continuous twin-screw wet granulation (TSWG), as the material experiences a much shorter residence time (2-40 s) in the granulator barrel compared to batch-wise granulation processes. Polyvinyl alcohol (PVA) 4-88 was identified as an effective binder during TSWG, but the potential of other PVA grades-differing in polymerization and hydrolysis degree-has not yet been studied. Therefore, the aim of the current study was to evaluate the potential of different PVA grades as a binder during TSWG. The breakage and drying behavior during the fluidized bed drying of drug-loaded granules containing the PVA grades was also studied. Three PVA grades (4-88, 18-88, and 40-88) were characterized and their attributes were compared to previously investigated binders by Vandevivere et al. through principal component analysis. Three binder clusters could be distinguished according to their attributes, whereby each cluster contained a PVA grade and a previously investigated binder. PVA 4-88 was the most effective binder of the PVA grades for both a good water-soluble and water-insoluble formulation. This could be attributed to its high total surface energy, low viscosity, good wettability of hydrophilic and hydrophobic surfaces, and good wettability by water of the binder. Compared to the previously investigated binders, all PVA grades were more effective in the water-insoluble formulation, as they yielded strong granules (friability below 30%) at lower L/S-ratios. This was linked to the high dispersive surface energy of the high-energy sites on the surface of PVA grades and their low surface tension. During fluidized bed drying, PVA grades proved suitable binders, as the acetaminophen (APAP) granules were dried within a short time due to the low L/S-ratio, at which high-quality granules could be produced. In addition, no attrition occurred, and strong tablets were obtained. Based on this study, PVA could be the preferred binder during twin screw granulation due to its high binder effectiveness at a low L/S-ratio, allowing efficient downstream processing. However, process robustness must be controlled by the included excipients, as PVA grades are operating in a narrow L/S-ratio range.