Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718

• Published in: Precision engineering Vol. 48; pp. 75 - 82
• Main Authors: Sugihara, Tatsuya, Nishimoto, Yuki, Enomoto, Toshiyuki
• Format: Journal Article
• Language: English
• Published: Elsevier Inc 01.04.2017
• Subjects: CBN; High-speed machining; Inconel 718; Texture; Tool wear; Tribology; High-speed machining; Inconel 718; Texture; CBN; Tool wear; Tribology
• ISSN: 0141-6359; 1873-2372
• DOI: 10.1016/j.precisioneng.2016.11.007

•Detailed wear behavior of a CBN cutting tool in high-speed machining (HSM) of Inconel 718 is clarified.•Based on the determined wear mechanism, CBN cutting tools with textured flank faces are newly developed.•Experimental results show that the textured flank face remarkably extend the CBN cutting tool life in HSM of Inconel 718. Nickel-based superalloys such as Inconel 718 offer several advantages, including high-temperature strength and high corrosion resistance; this has led to a rapid increase in the demand for such materials, particularly in the aircraft industry. In contrast, these alloys are known to be among the most difficult-to-cut materials because of their mechanical and chemical properties, and tools used for this purpose have extremely short lifetimes. Recently, cubic boron nitride (CBN), which is the second hardest of all known materials, has received significant attention as a material for cutting tools and has already established itself in many fields of application. However, the performance of CBN tools is still insufficient for practical use, especially in the high-speed machining of Inconel 718. To overcome this problem, we first conducted orthogonal cutting experiments on Inconel 718 and performed cross-sectional observations of the CBN cutting tool in order to identify its wear mechanisms in continuous cutting operations under high-speed machining conditions (300m/min). As a result, it was found that fatal tool failure occurs through crater and flank wear because of diffusion led by high cutting temperatures and subsequent chip adhesion to the tool flank face, accompanied by cutting edge chipping. Based on these results, a CBN cutting tool with a textured flank face was newly developed to improve the cutting tool life. Experimental: results showed that micro grooves generated on the flank face significantly suppressed the cutting edge chipping and remarkably extended the lifetime of the CBN tool during high-speed machining of Inconel 718.