Multimode interference tapered fiber refractive index sensors
Real-time monitoring of the fabrication process of tapering down a multimode-interference-based fiber structure is presented. The device is composed of a pure silica multimode fiber (MMF) with an initial 125 μm diameter spliced between two single-mode fibers. The process allows a thin MMF with adjus...
Saved in:
Published in | Applied optics. Optical technology and biomedical optics Vol. 51; no. 24; p. 5941 |
---|---|
Main Authors | , , , , |
Format | Journal Article |
Language | English |
Published |
United States
20.08.2012
|
Online Access | Get more information |
Cover
Loading…
Summary: | Real-time monitoring of the fabrication process of tapering down a multimode-interference-based fiber structure is presented. The device is composed of a pure silica multimode fiber (MMF) with an initial 125 μm diameter spliced between two single-mode fibers. The process allows a thin MMF with adjustable parameters to obtain a high signal transmittance, arising from constructive interference among the guided modes at the output end of the MMF. Tapered structures with waist diameters as low as 55 μm were easily fabricated without the limitation of fragile splices or difficulty in controlling lateral fiber alignments. The sensing device is shown to be sensitive to the external environment, and a maximum sensitivity of 2946 nm/refractive index unit in the refractive index range of 1.42-1.43 was attained. |
---|---|
ISSN: | 2155-3165 |
DOI: | 10.1364/AO.51.005941 |