Removal of organic solvent from cathodic electrophoretic emulsion paint by vacuum steam stripping

• Published in: Journal of Central South University Vol. 20; no. 7; pp. 1812 - 1817
• Main Authors: Qiu, Yun-ren, Li, Xiao, Wu, Ding-yu
• Format: Journal Article
• Language: English
• Published: Berlin/Heidelberg Springer Berlin Heidelberg 01.07.2013
• Subjects: Engineering; Metallic Materials; methyl ethyl ketone; methyl isobutyl ketone; waterborne coating; environment friendly emulsion paint; vacuum steam stripping
• ISSN: 2095-2899; 2227-5223
• DOI: 10.1007/s11771-013-1677-6

The production of environmental friendly emulsion paint is of great significance. Vacuum steam stripping of methyl isobutyl ketone (MIBK) and methyl ethyl ketone (MEK) from cathodic electrophoretic emulsion was studied. The effects of mass ratio of vapor to feed ( V / F ), vacuum degree and feed temperature on removal rate of MIBK and MEK, emulsion size and solid volume fraction of the emulsion were investigated, and the removal of MIBK and MEK from cathodic electrophoretic emulsion by vacuum desorption was also studied. The results show that removal rates of both MIBK and MEK increase with the increase of V / F , vacuum degree and feed temperature. Removal rates of MIBK and MEK are 98.3% and 93.6%, respectively, at the operating condition V / F of 0.7, feed temperature of 27 °C and vacuum degree of 90 kPa. The emulsion size of cathodic electrophoretic emulsion increases slightly with feed temperature when temperature is below 42 °C, and increases rapidly with feed temperature when temperature is above 42 °C. Solid volume fraction increases by 10% as vacuum degree increases from 0 to 90 kPa at V / F of 0.7 and feed temperature of 27 °C. Compared with vacuum desorption, vacuum steam stripping can get a higher removal rate of MIBK and MEK under the same feed flow, vacuum degree and feed temperature.