Effects of iron/silicon/magnesium/aluminum on CaO carbonation of CO2 in steel slag-based building materials during carbonation curing

• Published in: Construction & building materials Vol. 298; p. 123889
• Main Authors: Ma, Zhuohui, Liao, Hongqiang, Wang, Li, Cheng, Fangqin
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 06.09.2021
• Subjects: CaO; Carbonation curing; CO2 sequestration; Metal oxide; Non-metal oxide; Steel slag; CaO; Metal oxide; CO2 sequestration; Non-metal oxide; Carbonation curing; Steel slag
• ISSN: 0950-0618; 1879-0526
• DOI: 10.1016/j.conbuildmat.2021.123889

•The effects of concomitant elements on CaO mineralized fixed CO2 was investigated.•Synergistic effect was potential mechanism in enhancement of carbonation.•Carbonation rate and efficiency were defined and calculated.•Provide a theoretical basis for the carbonation curing. Carbonation curing can enhance the mechanical properties of steel slag-based building materials and consume large amounts of CO2, making it a widely process. Due to the complexity of steel slag, in addition to CaO, other concomitant metallic/nonmetallic elements, such as Fe, Si, Mg and Al also have a certain influence on carbonation reaction. In this study, Fe2O3, Fe3O4, SiO2, MgO and Al2O3 was added to CaO to form a binary system according to the chemical composition of real steel slag. The influences of these oxides on the carbonation rate and CaO carbonation efficiency were investigated, respectively. The results showed that compared with pure CaO, the rates of carbonation reaction of CaO + Fe2O3, CaO + Fe3O4, CaO + SiO2, CaO + MgO and CaO + Al2O3 were increased by 5.5%, 13.2%, 13.2%, 6.9% and 8.5%, respectively. The carbonation efficiency of CaO in CaO + Fe2O3, CaO + Fe3O4, CaO + MgO, CaO + Al2O3 increased by 3.6%, 4.3%, 10.1%, and 1.2%, respectively. Synergistic effect was recognized between CaO and Fe2O3, Fe3O4, MgO and Al2O3, respectively. The carbonation efficiency of CaO in CaO + SiO2 decreased by 2.4%. One reason should be the carbonation products, which exhibited ectopic dispersion and covered the surfaces of Fe2O3, Fe3O4, MgO and Al2O3, which effectively helped to avoid in-situ aggregation and thus covered the surfaces of the CaO particles. This improved the carbonation reaction rate and efficiency. Another reason could be the alkaline oxides, such as Fe2O3, Fe3O4 and MgO, and amphoteric oxides, such as Al2O3, stimulated the carbonation reaction of CaO and CO2, while acid oxides, such as SiO2, inhibited the carbonation reaction.