Electric Control of Thermal Contributions to the Nonlinear Optical Properties of Nitrobenzene

• Published in: Advanced Physics Research Vol. 3; no. 1
• Main Authors: Bongu, Sudhakara Reddy, Buchmüller, Maximilian, Neumaier, Daniel, Görrn, Patrick
• Format: Journal Article
• Language: English
• Published: Wiley-VCH 01.01.2024
• Subjects: electrical stirring; nonlinear refractive index; optical Kerr effect; self‐focusing systems; thermal lens
• ISSN: 2751-1200; 2751-1200
• DOI: 10.1002/apxr.202300053

Thermal effects are inevitable when an absorptive nonlinear optical material interacts with long pulse duration or high repetition rate laser pulses. It results in inaccurate characterization and reduction in efficiency of the nonlinear materials for device applications. In this article, the study investigates the influence of an external electric field on the thermal contribution to the nonlinear optical response of nitrobenzene (NB). Z‐scan measurements are performed on NB using 330 ps laser pulses at a wavelength of 532 nm with variable (10 Hz to 1 kHz) repetition rates. At low repetition rates, NB shows a positive nonlinear refractive index (+ n2), which leads to self‐focusing of the laser beam due to the optical Kerr effect. Cumulative thermal effects occur above a repetition rate of 200 Hz. At high repetition rates (>750 Hz), the sign of n2 becomes negative, implying a self‐defocusing behavior of the sample arising from the thermal‐induced nonlinear refractive index. By applying an external DC field to the NB, a reduction of the thermal contribution can be observed. At a sufficiently high electric field strength, the thermal contribution is suppressed and the inherent Kerr nonlinearity can be observed despite the high repetition rate of the pump laser. The electric control over the thermal contribution to the nonlinear optical properties of nitrobenzene is demonstrated. By applying an external DC field to the material, a flow of the liquid is triggered. This motion enables a permanent exchange of material in the illumination region and thus thermal lens effects can be controlled.