Mechanistic Investigation of Polymer‐Based All‐Solid‐State Lithium/Sulfur Battery

• Published in: Advanced functional materials Vol. 31; no. 41
• Main Authors: Liu, Yang, Liu, Haowen, Lin, Yitao, Zhao, Yuxing, Yuan, Hua, Su, Yipeng, Zhang, Jifang, Ren, Shuaiyang, Fan, Haiyan, Zhang, Yuegang
• Format: Journal Article
• Language: English
• Published: Hoboken Wiley Subscription Services, Inc 01.10.2021
• Subjects: Anode effect; Anodic dissolution; Corrosion effects; Dissolution; electrode/electrolyte interfaces; Electrolytes; Flux density; Inhomogeneity; Interlayers; Lithium; Lithium sulfur batteries; Materials science; Optical microscopy; Photoelectrons; Polymers; polymer‐based all‐solid‐state lithium batteries; Power sources; reaction mechanisms; Sulfur; Uniform attack (corrosion)
• ISSN: 1616-301X; 1616-3028
• DOI: 10.1002/adfm.202104863

Although employing solid polymer electrolyte (SPE) in all‐solid‐state lithium/sulfur (ASSLS) batteries is a promising approach to obtain a power source with both high energy density and safety, the actual performance of SPE‐ASSLS batteries still lag behind conventional lithium/sulfur batteries with liquid ether electrolyte. In this work, combining characterization methods of X‐ray photoelectron spectroscopy, in situ optical microscopy, and three‐electrode measurement, a direct comparison between these two battery systems is made to reveal the mechanism behind their performance differences. In addition to polysulfides, it is found that the initial elemental sulfur can also dissolve into and diffuse through the SPE to reach the anode. Different from the shuttle effect that causes uniform corrosion on the anode in a liquid electrolyte, dissolved sulfur species in SPE unevenly passivate the anode surface and lead to the inhomogeneous Li+ plating/stripping at the anode/SPE solid‐solid interface. Such inhomogeneity eventually causes void formation at the interface, which leads to the failure of SPE‐ASSLS batteries. Based on this understanding, a protection interlayer is designed to inhibit the shuttling of sulfur species, and the modified SPE‐ASSLS batteries show much‐improved performance in cycle life. A mechanistic investigation of polymer‐based all‐solid‐state lithium/sulfur batteries reveals that the diffusion of sulfur species is the main reason leading to the inhomogeneous Li+ plating/stripping at the anode/electrolyte interface. A protection interlayer is designed to inhibit the shuttling of dissolved sulfur species and extend cyclability in modified lithium/sulfur batteries.