Determination of heat transfer parameters by use of finite integral transform and experimental data for regular geometric shapes

• Published in: Heat and mass transfer Vol. 53; no. 12; pp. 3529 - 3544
• Main Authors: Talaghat, Mohammad Reza, Jokar, Seyyed Mohammad
• Format: Journal Article
• Language: English
• Published: Berlin/Heidelberg Springer Berlin Heidelberg 01.12.2017; Springer Nature B.V
• Subjects: Aluminum; Cylinders; Differential equations; Diffusivity; Engineering; Engineering Thermodynamics; Heat and Mass Transfer; Heat transfer; Heat transfer coefficients; Industrial Chemistry/Chemical Engineering; Integral transforms; Mathematical analysis; Original; Parameter estimation; Temperature ratio; Thermal diffusivity; Thermodynamics
• ISSN: 0947-7411; 1432-1181
• DOI: 10.1007/s00231-017-2067-7

This article offers a study on estimation of heat transfer parameters (coefficient and thermal diffusivity) using analytical solutions and experimental data for regular geometric shapes (such as infinite slab, infinite cylinder, and sphere). Analytical solutions have a broad use in experimentally determining these parameters. Here, the method of Finite Integral Transform (FIT) was used for solutions of governing differential equations. The temperature change at centerline location of regular shapes was recorded to determine both the thermal diffusivity and heat transfer coefficient. Aluminum and brass were used for testing. Experiments were performed for different conditions such as in a highly agitated water medium ( T  = 52 °C) and in air medium ( T  = 25 °C). Then, with the known slope of the temperature ratio vs. time curve and thickness of slab or radius of the cylindrical or spherical materials, thermal diffusivity value and heat transfer coefficient may be determined. According to the method presented in this study, the estimated of thermal diffusivity of aluminum and brass is 8.395 × 10 −5 and 3.42 × 10 −5 for a slab, 8.367 × 10 −5 and 3.41 × 10 −5 for a cylindrical rod and 8.385 × 10 −5 and 3.40 × 10 −5  m 2 /s for a spherical shape, respectively. The results showed there is close agreement between the values estimated here and those already published in the literature. The TAAD% is 0.42 and 0.39 for thermal diffusivity of aluminum and brass, respectively.