On the impact of turbocharger thermo-mechanical limitations on new generation gasoline engines

• Published in: Applied thermal engineering Vol. 222; p. 119934
• Main Authors: Serrano, José Ramón, Climent, Héctor, De la Morena, Joaquín, Gómez-Vilanova, Alejandro
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 05.03.2023
• Subjects: Internal combustion engine; Turbine inlet temperature; Variable geometry turbine; Variable valve timing optimization; Internal combustion engine; Variable valve timing optimization; Variable geometry turbine; Turbine inlet temperature
• ISSN: 1359-4311
• DOI: 10.1016/j.applthermaleng.2022.119934

Among other advances in spark ignited internal combustion engines’ field, the variable geometry turbine (VGT) is being analysed to achieve further CO2 reduction objectives. This paper analyses the potential implications of replacing nowadays standard, the waste-gate (WG) technology, with VGT. To do so, after developing a robust and validated model, this work proposes a methodology to optimize the variable valve timing (VVT), at full load working conditions, in a new generation spark ignited (SI) engine, coupled to a VGT prototype. The optimization methodology accounts for the different thermo-mechanical limits of such technology compared to the reference WG turbocharger, particularly in terms of the turbine inlet temperature (T3). Torque differences show a systematic improvement by using a VGT, reaching approximately 22 Nm of improvement and about 17 g/kWh, although the difference in torque is smaller after 3500 rpm due to the more restrictive T3 limit imposed. As well, at partial loads, the same procedure is developed, but targeting the optimization of the engine efficiency. At partial loads, when no exhaust gas recirculation technique is applied, few advantages are identified. However, with exhaust gasses recirculation (EGR) technique, improvements reach 3 g/kWh and permit extending the desired EGR rate towards the lower speeds. •Thermomechanical limits reduce turbocharging benefits in new certification cycles.•Next generation WG and VGT limits impact on performance and efficiency are explored.•Highly validated 1D engine model to reproduce engine operation accurately.•Synergies between stoichiometric operation, VVT optimization and VGT usage.•VGT results improved torque and BSFC figures compared to nowadays standards.