Structured porous 17-PH stainless steel layer fabrication through laser powder bed fusion

• Published in: International journal of sustainable engineering Vol. 17; no. 1; pp. 1 - 16
• Main Authors: Sardarian, S., Dehgahi, S., Wei, F., Secanell, M., Qureshi, A.J.
• Format: Journal Article
• Language: English
• Published: Taylor & Francis Group 31.12.2024
• Subjects: LPBF; permeability; porosity; Porous layer
• ISSN: 1939-7038; 1939-7046
• DOI: 10.1080/19397038.2024.2334040

ABSTRACTThis study aimed to fabricate thin, porous layers of 17-4 PH stainless steel with a defined porosity using laser powder bed fusion (LPBF). The central composite design (CCD) approach was utilized to examine the effect of process parameters on porosity. Three different methods were employed to measure the porosity of 17-4 PH stainless steel samples, i.e. theoretical analysis, buoyancy, and X-ray computed tomography (X-CT). A statistical quadratic regression model is generated that correlates with LPBF parameters to forecast porosity with high prediction accuracy. The maximum obtained porosity is 51.25% ± 0.33% with a laser power of 60 W, a scanning speed of 1800 mm/s, and a hatch spacing of 0.115 mm, which resulted in an average pore size of 24.8 ± 0.38 µm. Permeability was also analysed, as the volume energy density decrease ranges from 19.30 to 14.22 J/mm3, the permeability coefficient increases from 1.39 to 9.41 × 10−11 m2. In addition, it is observed that the minimum energy density to fabricate the 17-4 PH SS with the highest porosity and free of defects and fragmentation is 14.2 J/mm3.