Flow structures around a circular cylinder with bilateral splitter plates and their dynamic characteristics

• Published in: Ocean engineering Vol. 269; p. 113547
• Main Authors: Zhu, Hongjun, Chen, Quanyu, Tang, Tao, Alam, Md. Mahbub, Zhou, Tongming
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.02.2023
• Subjects: Flow structure; Inclination angle; Splitter plate; Vortex shedding regime; Inclination angle; Vortex shedding regime; Splitter plate; Flow structure
• ISSN: 0029-8018; 1873-5258
• DOI: 10.1016/j.oceaneng.2022.113547

Flow structures around a circular cylinder with bilateral splitter plates and their dynamic characteristics are numerically investigated at a low Reynolds number of 100. The two splitter plates with the same length as the half of cylinder diameter are symmetrically placed beside the cylinder. In this work, three gap ratios of G/D = 0, 0.5 and 1.0 (G is the gap distance between the cylinder surface and the near end of plate, D is the diameter of circular cylinder) and inclination angle (α, between splitter plate and wake centerline) ranging from 0° to 90° are examined. According to flow characteristics, five vortex shedding regimes are identified, including "2S" (two vortices are alternatively shed per cycle) regime, single-sided regime, wake-flapping regime, steady regime and irregular regime. Apart from the main vortices, some special vortices such as subordinate vortices, tip vortices and persisted vortices are recognized. Additionally, local "2S″ and "4S" (four vortices are shed per cycle) regimes are observed behind the cylinder and the plates, respectively. The dynamic mode decomposition (DMD) results show that the first mode possesses the majority of energy of the flow field. As α increases, the splitter plates contribute to the lift reduction, especially when a gap is introduced. By contrast, the bilateral plates lead to a significant growth in the drag coefficient when α ≥ 15°. •Flow past a cylinder with bilateral splitter plates is numerically investigated.•Five vortex shedding modes are identified in the wake.•Hydrodynamic and wake characteristics are sensitive to incidence angle and gap.•Increasing gap can suppress wake interference, especially at larger incidence angles.•The vortex shedding frequency is reduced by the equipment of splitter plates.