Dry reforming of methane using bimetallic Pt–Ni/Ti-SBA-15: Effect of Si/Ti ratio on catalytic activity and stability

• Published in: International journal of hydrogen energy Vol. 48; no. 80; pp. 31126 - 31141
• Main Authors: Palanichamy, Kuppusamy, Sasirekha, Natarajan
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 19.09.2023
• Subjects: Dry reforming; Methane; Nickel; Syngas; Ti-SBA-15; Methane; Dry reforming; Nickel; Ti-SBA-15; Syngas
• ISSN: 0360-3199; 1879-3487
• DOI: 10.1016/j.ijhydene.2023.04.183

A one-pot hydrothermal technique was used to make a series of Ti-incorporated mesoporous SBA-15 with varying Si/Ti ratios. The synthesized mesoporous materials were modified by introducing Ni (9%) as active metal and Pt (0.5%) as promoter using nickel nitrate and chloroplatinic acid, respectively, as metal precursors through incipient wetness impregnation method. All the catalysts and supports were characterized by X-ray diffraction, BET surface area, Fourier Transform–Infrared spectroscopy, UV–Visible diffuse reflectance spectroscopy, H2–temperature-programmed reduction, NH3–temperature-programmed desorption, transmission electron microscopy, and thermogravimetric analysis. The catalysts were subjected to dry reforming of methane using CH4/CO2 (molar feed ratio of 1:1) with a gas hourly space velocity (GHSV) of 36,000 mL. g−1. h−1 at a temperature range of 400–800 °C. The characterization results confirmed the incorporation of titanium ions in the SBA-15 matrix. However, Si/Ti loadings of 10 and 20 exhibited low extra-framework anatase phase titania levels, and high surface acidity. Among the subjected catalysts, Pt–Ni/Ti-SBA-15 (Si/Ti = 10) showed higher catalytic activity (CH4 = 84% and CO2 = 91%) with a H2/CO ratio of 3.6 after an 8 h reaction, and exhibited higher stability and coke tolerance than the bare catalysts and other modified Pt–Ni/Ti-SBA-15 catalysts. The characterization results of spent catalysts also confirmed low coke deposition on titanium-incorporated catalysts. The remarkable performance of the Pt–Ni/Ti-SBA-15 towards CH4 conversion and CO2 conversion may be related to strong metal–support interaction, presence of strong and weak acid sites, well-dispersed active metals and bi-metallic interaction. [Display omitted] •Ti4+ incorporation in Pt–Ni/SBA-15 increased the conversion of CH4 and CO2 for DRM.•Pt–Ni/Ti-SBA-15 catalysts were more active and stable than Pt–Ni/SBA-15 catalyst.•Addition of Ti and Pt in Ni/SBA-15 showed high resistance towards coke formation.•Pt–Ni/Ti-SBA-15 (10) showed maximum conversion, stability and least coke deposition.