Development and properties evaluation of diamond-containing metal composites for fused filament fabrication of diamond tool

• Published in: Diamond and related materials Vol. 130; p. 109423
• Main Authors: Kong, Xiangwang, Su, Zhou, He, Tao, Wu, Jingjing, Wu, Dongyu, Zhang, Shaohe
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.12.2022
• Subjects: Diamond tool; Fused filament fabrication; Interface adhesion; Properties of composites filament; Surface modifier; Surface modifier; Fused filament fabrication; Interface adhesion; Properties of composites filament; Diamond tool
• ISSN: 0925-9635; 1879-0062
• DOI: 10.1016/j.diamond.2022.109423

Existing studies rarely focus on manufacturing complex diamond tools via fused filament fabrication subject to the development of corresponding filaments. This work aims to develop diamond-containing metal composites filament to effectively fabricate ultrathin diamond blade. In this study, properties of filaments with different volumes of diamond and surface modifier were characterized and evaluated. The interface adhesion between the diamond particles and the binder matrix was enhanced with the surface modifier, thereby reducing the internal defects and improving the diamond distribution uniformity. Flexibility and tensile strength of the filaments could be greatly enhanced as the improved interfacial adhesion. Besides, the enhanced viscosity of the feedstock contributed to a closer adhesion between the deposited strands. Finally, ultrathin diamond blade with a sintered density of 95.2 % could be achieved with the optimized filament. The results demonstrate the ability of the optimized filament to fabricate diamond tool via fused filament fabrication. [Display omitted] •Diamond-containing metal matrix composite filaments were successfully fabricated.•Diamond content are highly relevant to the quality of the filaments.•Surface modifier improved the interface adhesion between diamond and binder matrix.•Interface adhesion status influences mechanical properties and viscosity of filaments.•Blade with a sintered density and thickness of 95.2 % and 0.33 mm can be achieved.