Thermal conductivity of organic semi-conducting materials using 3omega and photothermal radiometry techniques

• Published in: EPJ Web of conferences Vol. 79; p. 2001
• Main Authors: Reisdorffer, Frederic, Garnier, Bertrand, Horny, Nicolas, Renaud, Cedric, Chirtoc, Mihai, Nguyen, Thien-Phap
• Format: Journal Article
• Language: English
• Published: EDP Sciences 2014
• Subjects: Condensed Matter; Materials Science; Physics
• ISSN: 2100-014X; 2100-014X
• DOI: 10.1051/epjconf/20137902001

Organic semiconductors for opto-electronic devices show several defects which can be enhanced while increasing the operating temperature. Their thermal management and especially the reduction of their temperature are of great interest. For the heat transfer study, one has to measure the thermal conductivity of thin film organic materials. However the major difficulty for this measurement is the very low thickness of the films which needs the use of very specific techniques. In our work, the 3-omega and photothermal radiometric methods were used to measure the thermal conductivity of thin film organic semiconducting material (Alq3). The measurements were performed as function of the thin film thickness from 45 to 785 nm and also of its temperature from 80 to 350 K. With the 3 omega method, a thermal conductivity value of 0.066 W.m−1K−1 was obtained for Alq3 thin film of 200 nm at room temperature, in close agreement with the photothermal value. Both techniques appear to be complementary: the 3 omega method is easier to implement for large temperature range and small thicknesses down to a few tens of nanometers whereas the photothermal method is more suitable for thicknesses over 200nm since it provides additional information such as the thin film volumetric heat capacity.