Plasma immersion N and N+C implantation into high-speed tool steel: surface morphology, phase composition and mechanical properties

• Published in: Surface & coatings technology Vol. 142; pp. 406 - 411
• Main Authors: Uglov, V.V, Anishchik, V.M, Kuleshov, A.K, Fedotova, J.A, Kvasov, N.T, Danilyuk, A.L, Guenzel, R, Reuther, H, Richter, E
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.07.2001
• Subjects: High-speed steel; Mechanical properties; Microstructure; Phase composition; Plasma immersion ion implantation; High-speed steel; Mechanical properties; Phase composition; Microstructure; Plasma immersion ion implantation
• ISSN: 0257-8972; 1879-3347
• DOI: 10.1016/S0257-8972(01)01052-0

The effect of plasma immersion N and N+C implantation at elevated temperatures (380°C and 500°C) on microstructure, element and phase composition, microhardness and tribological properties of high-speed tool steel (HSS) has been studied. It has been established that under plasma immersion ion implantation (PIII) of nitrogen (8×10 18 ions/cm 2, 380°C) the microhardness of steel surface layers increases by a factor of 2.5 and the friction coefficient decreases by a factor of 2. By methods of Auger electron spectrometry (AES), energy dispersive X-ray analysis (EDX), glancing X-ray diffraction (GXRD) and scanning electron microscopy (SEM) it is shown that transformations of near-surface layers are associated with: the formation of strained ε-(Fe,M) 2+ x N; nitrogen doping of M 6C carbide; the formation highly defective regions (channels and/or pores) predominantly localized near carbide precipitates in near-surface layers (up to 10 μm); the considerable increase of concentration of tiny (up to 0.2 μm) carbide phases doped with nitrogen; the formation of less modified deep layers in the case of N+C as compared to N PIII; the significant selective sputtering of martensite at 500°C.