Alloy preparation by levitation melting

• Published in: Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment Vol. 334; no. 1; pp. 116 - 121
• Main Authors: Ingelbrecht, C., Peetermans, F.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 15.09.1993
• ISSN: 0168-9002; 1872-9576
• DOI: 10.1016/0168-9002(93)90536-Q

Levitation melting is an ideal technique for the preparation of small quantities of alloys for reference material or nuclear applications. The method avoids contamination of the melt and electromagnetic stirring ensures good mixing in the molten state. Evaporation losses under inert atmosphere are usually small allowing close control of alloy composition. Very dilute alloys, containing alloying additions at ppm levels, can be prepared using several dilution steps chosen to minimize errors in concentration. Different levitation methods allow the melting of low or high density metal in quantities from a few grammes up to 1 kg or more, although metals with high vapour pressure or low surface tension can be difficult to handle. Good homogeneity has been demonstrated for 20 g aluminium alloy samples chill-cast into water-cooled copper moulds. Examples of alloys prepared at CBNM by levitation melting are solid standards for atomic absorption spectrometry, U-Pu metal “spikes” for material accountancy measurements by mass spectrometry and alloy reference materials for reactor neutron dosimetry.