Evaluation of Classification Possibility of Coke Breeze by Drag Force

• Published in: Archives of metallurgy and materials Vol. 69; no. No 1; pp. 151 - 156
• Main Authors: Lee, Ji-A, Jin, Bong-Min, Han, Jeong-Whan
• Format: Journal Article
• Language: Polish; English
• Published: Polish Academy of Sciences 01.01.2024
• Subjects: coke breeze; drag model; numerical simulation; powder processing; sintering process
• ISSN: 2300-1909; 2300-1909
• DOI: 10.24425/amm.2024.147804

Sintered ore used as blast furnace burden materials is produced by mixing iron ore, coke, and limestone, then burning the coke and sintering the iron ore with the combustion heat. Among the coke charged, A particle size of 0.25 mm or less has an insignificant effect as a heat source and adhere to the surface of other materials to inhibit the reaction between oxygen and raw materials, thereby decreasing the quality of sintered ore. Therefore, to increase combustion efficiency, it is necessary to reduce the ratio of coke breeze in the charged coke. In this study, theoretical calculation, experiment and simulation were conducted to investigate the possibility of size classification by drag force in the process of dropping coke after being transported through a belt conveyor. The height of belt conveyor was at 1m, and velocity of the belt was 1.5, 2.3, and 2.6 m/s, which were considered as experimental variables. After falling, the distribution of coke particle size according to the horizontal travel distance was confirmed, and a fall trajectory prediction formula model was created through the drag model of polydisperse system and compared with the experimental and analysis results.