Study on the laminar combustion characteristics and kinetic of IC8H18/NH3 premixed flames

• Published in: Fuel (Guildford) Vol. 356; p. 129633
• Main Authors: Liu, Zechang, He, Xu, Jiang, Zhenghui, Feng, Guangyuan, Zhao, Chengyuan, Yang, Qing
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 15.01.2024
• Subjects: Flame instability; IC8H18/NH3; Laminar burning velocity; Markstein length; Markstein length; IC8H18/NH3; Laminar burning velocity; Flame instability
• ISSN: 0016-2361
• DOI: 10.1016/j.fuel.2023.129633

•The SL of IC8H18/NH3 mixtures at elevated pressure and temperature was measured.•A reduced mechanism for IC8H18/NH3 mixtures proposed by Cai and Pitsch was utilized and further optimized.•The temperature and pressure coefficient of IC8H18/NH3 mixture was obtained.•The effect of ammonia addition on flame instability of IC8H18/NH3 mixtures was analyzed. To promote the transition to a carbon neutral society, it is necessary to conduct a comprehensive research on the utilization of ammonia contained in gasoline engine. In the present study, the laminar burning velocity (SL), Markstein length (Lb) and flame instability of isooctane/ammonia (IC8H18/NH3)-air mixtures were analyzed at the initial temperatures (T) of 400 K and 470 K, initial pressure (P) of 1–4 atm, ammonia mole fraction (XNH3) of 0%-70% and an equivalence ratio (ϕ) ranging from 0.8 to 1.3. Also, the kinetic mechanism of IC8H18/NH3 as proposed by Cai et al. [Combust. Flame, 162, 2015] was further optimized and compared with the mechanism of CRECK and Cai. The results show that the difference between the Cai and present mechanisms is largely attributable to the variation in sensitivity of NH3 oxidation-related reaction to SL. In addition, it is widely known that SL is dependent on the initial temperature and pressure. In order to improve the applicability of IC8H18/NH3 fuel mixtures, their temperature (α) and pressure (β) coefficients were determined given varying ϕ and XNH3. Meanwhile, a mathematical correlation for SL was also conducted. The analysis of Lb was also conducted to obtain the results showing that Lb decreases with ϕ increasing, except for NH3-air flame. Moreover, as XNH3 increases, Lb varies between lean and rich flames. For lean-flames, NH3 addition leads to a significant decrease in Lb, while for rich-flames, NH3 addition causes a marginal increase in Lb. All these are attributed to the variation in Zel’dovich number (Ze), effective Lewis number (Leeff) and flame thickness (δ). Furthermore, the instability of flame suggests that the addition of ammonia enhances the stability of the flame due to the reduced molecular diffusion effect. Moreover, an increase in XNH3 contributes only to a slight decrease of critical Peclect number (Pecr), and a sharp rise in the critical flame radius (Rcr) results from the increase of flame thickness (δ).