Preparation of binary and hybrid epoxy nanocomposites containing graphene oxide and rubber nanoparticles: Fracture toughness and mechanical properties

• Published in: Journal of applied polymer science Vol. 136; no. 4
• Main Authors: Mehrabi‐Kooshki, Mahdi, Jalali‐Arani, Azam
• Format: Journal Article
• Language: English
• Published: Hoboken, USA John Wiley & Sons, Inc 20.01.2019; Wiley Subscription Services, Inc
• Subjects: Bifurcations; Cavitation; Fracture toughness; Graphene; Heat treating; Hybrid systems; Impact strength; Materials science; Mechanical properties; Modulus of elasticity; morphology; Nanocomposites; Nanoparticles; nanotubes, graphene, and fullerenes; Polymers; Rubber; Scanning electron microscopy; thermosets; X-ray diffraction
• ISSN: 0021-8995; 1097-4628
• DOI: 10.1002/app.46988

ABSTRACT Binary and hybrid epoxy nanocomposites modified with graphene oxide (GO) and core–shell rubbers (CSR) were synthesized via the solvent‐exchange method. X‐ray diffraction analysis and scanning electron microscopy of the samples showed a homogeneous dispersion of GO and CSR in the epoxy matrix. The tensile modulus and tensile strength of the samples modified with CSR decreased continuously with increasing CSR content; however, with the addition of only 0.05 phr GO to the neat epoxy and rubber‐modified epoxy, these properties significantly increased. The use of GO and CSR individually improved the fracture toughness, but the impact of GO was greater. The simultaneous use of GO and CSR improved both the fracture toughness and the mechanical properties. Our investigation of the toughening mechanism indicated that crack deflection–bifurcation, crack pinning, and particle debonding–pullout in the presence of GO nanosheets and limited rubber particle cavitation contributed to fracture toughness improvement in the hybrid systems. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 46988.