Metakaolin/sludge based geopolymer adsorbent on high removal efficiency of Cu2

• Published in: Case Studies in Construction Materials Vol. 17; p. e01428
• Main Authors: Arokiasamy, Pilomeena, Abdullah, Mohd Mustafa Al Bakri, Abd Rahim, Shayfull Zamree, Mohd Arif Zainol, Mohd Remy Rozainy, Mohd Salleh, Mohd Arif Anuar, Kheimi, Marwan, Chaiprapa, Jitrin, Sandu, Andrei Victor, Vizureanu, Petrica, Abdul Razak, Rafiza, Jamil, Noorina Hidayu
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.12.2022; Elsevier
• Subjects: Adsorbent; Adsorption; Geopolymer; Metakaolin; Sludge; Metakaolin; Geopolymer; Adsorption; Sludge; Adsorbent
• ISSN: 2214-5095; 2214-5095
• DOI: 10.1016/j.cscm.2022.e01428

Activated carbon (AC) has received a lot of interest from researchers for the removal of heavy metals from wastewater due to its abundant porous structure. However, it was found unable to meet the required adsorption capacity due to its amorphous structure which restricts the fundamental studies and structural optimization for improved removal performance. In addition, AC is not applicable in large scale wastewater treatment due its expensive synthesis and difficulty in regeneration. Thus, the researchers are paying more attention in synthesis of low cost geopolymer based adsorbent for heavy metal removal due its excellent immobilization effect. However, limited studies have focused on the synthesis of geopolymer based adsorbent for heavy metal adsorption by utilizing industrial sludge. Thus, the aim of this research was to develop metakaolin (MK) based geopolymer adsorbent with incorporation of two types of industrial sludge (S1 and S3) that could be employed as an adsorbent for removing copper (Cu2+) from aqueous solution through the adsorption process. The effects of varied solid to liquid ratio (S/L) on the synthesis of metakaolin/sludge based geopolymer adsorbent and the removal efficiency of Cu2+ by the synthesis adsorbent were studied. The raw materials and synthesized geopolymer were characterized by using x-ray fluorescence (XRF), x-ray diffraction (XRD), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and micro XRF. The concentration of Cu2+ before and after adsorption was determined by atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. The experimental data indicated that the synthesized geopolymer at low S/L ratio has achieved the highest removal efficiency of Cu2+ about 99.62 % and 99.37 % at 25 %:75 % of MK/S1 and 25 %:75 % of MK/S3 respectively compared to pure MK based geopolymer with 98.56 %. The best S/L ratio for MK/S1 and MK/S3 is 0.6 at which the reaction between the alkaline activator and the aluminosilicate materials has improved and enhanced the geopolymerization process. Finally, this work clearly indicated that industrial sludge can be utilized in developing low-cost adsorbent with high removal efficiency.