Graphite modified epoxy-based adhesive for joining of aluminium and PP/graphite composites

• Published in: The Journal of adhesion Vol. 96; no. 1-4; pp. 229 - 252
• Main Authors: Rzeczkowski, P., Pötschke, P., Fischer, M., Kühnert, I., Krause, B.
• Format: Journal Article
• Language: English
• Published: Taylor & Francis 11.03.2020
• Subjects: aluminium and alloys; composites; conductive adhesives; epoxy/epoxides; Mechanical properties of adhesives
• ISSN: 0021-8464; 1563-518X; 1545-5823
• DOI: 10.1080/00218464.2019.1688152

A graphite-modified adhesive was developed in order to simultaneously enhance the thermal conductivity and the strength of an adhesive joint. The thermal conductivity through the joint was investigated by using highly filled PP/graphite composite substrates, which were joined with an epoxy adhesive of different layer thicknesses. Similar measurements were carried out with a constant adhesive layer thickness, whilst applying an epoxy adhesive modified with expanded graphite (EG) (6, 10, and 20 wt%). By reducing the adhesive layer thickness or modifying the adhesive with conductive fillers, a significant increase of the thermal conductivity through the joint was achieved. The examination of the mechanical properties of the modified adhesives was carried out by tensile tests (adhesive only), lap-shear tests, and fracture energy tests (mode 1) with aluminium substrates. Modification of the adhesive with EG led to an increase of the tensile lap-shear strength and the adhesive fracture energy (mode 1) of the joint. In addition, burst pressure tests were performed to determine the strength of the joint in a complex component. The strength of the joint increased with the graphite content in the PP substrate and in the epoxy adhesive.