A Free-Source Method (FrSM) for Calibrating a Large-Aperture Microphone Array

• Published in: IEEE transactions on audio, speech, and language processing Vol. 21; no. 8; pp. 1632 - 1639
• Main Authors: Khanal, S., Silverman, H. F., Shakya, R. R.
• Format: Journal Article
• Language: English
• Published: Piscataway, NJ IEEE 01.08.2013; Institute of Electrical and Electronics Engineers
• Subjects: Accuracy; acoustic measurements; Applied sciences; array processing; Arrays; Calibration; Chirp; Detection, estimation, filtering, equalization, prediction; Exact sciences and technology; Information, signal and communications theory; Microphone arrays; microphone positions; Microphones; Miscellaneous; Position measurement; Signal and communications theory; Signal processing; Signal, noise; Telecommunications and information theory; Vectors; Performance evaluation; Positioning; Microphone; Array signal processing; Microphone arrays; microphone positions; Aperture antenna; Direct method; Transducer; Accuracy; Acoustic antenna; Antenna array; Target detection; Signal detection; array processing; Acoustic measurement; Acoustic signal; Calibration; Three dimensional model; Source localization; Volume; Acoustic arrays; Measurement method; Sensor array; acoustic measurements
• ISSN: 1558-7916; 1558-7924
• DOI: 10.1109/TASL.2013.2256896

Large-aperture microphone arrays can be used to capture and enhance speech from individual talkers in noisy, multi-talker, and reverberant environments. However, they must be calibrated, often more than once, to obtain accurate 3-dimensional coordinates for all microphones. Direct-measurement techniques, such as using a measuring tape or a laser-based tool are cumbersome and time-consuming. Some previous methods that used acoustic signals for array calibration required bulky hardware and/or fixed, known source locations. Others, which allowed more flexible source placement, often have issues with real data, have reported results for 2D only, or work only for small arrays. This paper describes a complete and robust method for automatic calibration using acoustic signals which is simple, repeatable, accurate, and has been shown to work for a real system. The method requires only a single transducer (speaker) with a microphone attached above its center. The unit is freely moved around the focal volume of the microphone array generating a single long recording from all the microphones. After that, the system is completely automatic. We describe the free source method (FrSM), validate its effectiveness and present accuracy results against measured ground truth. The performance of FrSM is compared to that from several other methods for a real 128-microphone array.