Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings

• Published in: Journal of thermal spray technology Vol. 23; no. 1-2; pp. 170 - 181
• Main Authors: Gupta, M., Skogsberg, K., Nylén, P.
• Format: Journal Article
• Language: English
• Published: Boston Springer US 2014
• Subjects: Analytical Chemistry; Characterization and Evaluation of Materials; Chemistry and Materials Science; Corrosion and Coatings; Machines; Manufacturing; Materials Science; Peer Reviewed; Processes; Surfaces and Interfaces; Thin Films; Tribology; lifetime; finite element modeling; interface roughness; stress state; thermal barrier coatings
• ISSN: 1059-9630; 1544-1016
• DOI: 10.1007/s11666-013-0022-9

Failure in Atmospheric Plasma-Sprayed (APS) thermal barrier coatings (TBCs) is associated with the thermo-mechanical stresses developing due to the thermally grown oxide (TGO) layer growth and thermal expansion mismatch during thermal cycling. The interface roughness has been shown to play a major role in the development of these induced stresses and lifetime of TBCs. Modeling has been shown as an effective tool to understand the effect of interface roughness on induced stresses. In the previous work done by our research group, it was observed that APS bondcoats performed better than the bondcoats sprayed with High Velocity Oxy-Fuel process which is contrary to the present literature data. The objective of this work was to understand this observed difference in lifetime with the help of finite element modeling by using real surface topographies. Different TGO layer thicknesses were evaluated. The modeling results were also compared with existing theories established on simplified sinusoidal profiles published in earlier works. It was shown that modeling can be used as an effective tool to understand the stress behavior in TBCs with different roughness profiles.