Performance of a Micro-Strip Gas Chamber for event wise, high rate thermal neutron detection with accurate 2D position determination

• Published in: Journal of instrumentation Vol. 9; no. 12; p. P12004
• Main Authors: Mindur, B., Alimov, S., Fiutowski, T., Schulz, C., Wilpert, T.
• Format: Journal Article
• Language: English
• Published: 01.12.2014
• Subjects: Beams (radiation); Converters; Detectors; Imaging; Prototypes; Signal processing; Spatial resolution; Thermal neutrons
• ISSN: 1748-0221; 1748-0221
• DOI: 10.1088/1748-0221/9/12/P12004

A two-dimensional (2D) position sensitive detector for neutron scattering applications based on low-pressure gas amplification and micro-strip technology was built and tested with an innovative readout electronics and data acquisition system. This detector contains a thin solid neutron converter and was developed for time- and thus wavelength-resolved neutron detection in single-event counting mode, which improves the image contrast in comparison with integrating detectors. The prototype detector of a Micro-Strip Gas Chamber (MSGC) was built with a solid super()natGd/CsI thermal neutron converter for spatial resolutions of about 100 [mu]m and counting rates up to 10 super(7) neutrons/s. For attaining very high spatial resolutions and counting rates via micro-strip readout with centre-of-gravity evaluation of the signal amplitude distributions, a fast, channel-wise, self-triggering ASIC was developed. The front-end chips (MSGCROCs), which are very first signal processing components, are read out into powerful ADC-FPGA boards for on-line data processing and thereafter via Gigabit Ethernet link into the data receiving PC. The workstation PC is controlled by a modular, high performance dedicated software suite. Such a fast and accurate system is crucial for efficient radiography/tomography, diffraction or imaging applications based on high flux thermal neutron beam. In this paper a brief description of the detector concept with its operation principles, readout electronics requirements and design together with the signals processing stages performed in hardware and software are presented. In more detail the neutron test beam conditions and measurement results are reported. The focus of this paper is on the system integration, two dimensional spatial resolution, the time resolution of the readout system and the imaging capabilities of the overall setup. The detection efficiency of the detector prototype is estimated as well.