Side abutment pressure distribution by field measurement

• Published in: Journal of China University of Mining and Technology Vol. 18; no. 4; pp. 527 - 530
• Main Authors: WANG, Lian-guo, SONG, Yang, HE, Xing-hua, ZHANG, Jian
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.12.2008
• Subjects: field measurement; peak pressure; pressure distribution; side abutment pressure; 侧支承压力; 压力分布; 最大压力; 现场测量; side abutment pressure; peak pressure; pressure distribution; field measurement
• ISSN: 1006-1266
• DOI: 10.1016/S1006-1266(08)60288-6

Given the 7123 working face in the Qidong Coal Mine of the Wanbei Mining Group, nine dynamic roof monitors were installed in the crossheading to measure the amount and velocity of roof convergence in different positions and at different times and three steel bored stress sensors were installed in the return airway to measure rock stress at depth. On the basis of this arrangement, the rule of change of the distribution of the side abutment pressure with the advance of the working face and movement of overlying strata was studied. The rule of change and the stability of rock stress at depth were measured. Secondly, the affected area and stability time of the side abutment pressure were also studied. The results show that： 1） During working, the face advanced distance was from 157 m to 99 m, the process was not effected by mining induced pressure. When the distance was 82 m, the position of peak stress was 5 m away from the coal wall. When the distance was 37 m, the position of peak stress away from the coal wall was about 15 m to 20 m and finally reached a steady state; 2） the time and the range of the peak of side rock pressure obtained from stress sensors were consistent with the results from the dynamic roof monitors; 3） the position of the peak pressure was 25 m away from the coal wall.