Printing parameters affect the electrochemical performance of 3D-printed carbon electrodes obtained by fused deposition modeling

• Published in: Journal of electroanalytical chemistry (Lausanne, Switzerland) Vol. 925; p. 116910
• Main Authors: Rocha, Raquel G., Ramos, David L.O., de Faria, Lucas V., Germscheidt, Rafael L., dos Santos, Diego P., Bonacin, Juliano A., Munoz, Rodrigo A.A., Richter, Eduardo M.
• Format: Journal Article
• Language: English
• Published: Amsterdam Elsevier B.V 15.11.2022; Elsevier Science Ltd
• Subjects: 3D-printed electrodes; Additive manufacturing; Ammonia; Availability; Carbon; Carbon black; Charge transfer; Chemical sensors; Conductive pathways; Electrochemical analysis; Electrochemical impedance spectroscopy; Electrodes; Electrons; Filaments; Fused deposition modeling; Fused filament fabrication; Parameters; Polylactic acid; Raman spectroscopy; Sensors; Spectrum analysis; Structural integrity; Thickness; Three dimensional printing; Vertical orientation; Fused filament fabrication; Additive manufacturing; Sensors; 3D-printed electrodes; Conductive pathways
• ISSN: 1572-6657; 1873-2569
• DOI: 10.1016/j.jelechem.2022.116910

•3D printed thermoplastic electrodes produced by fused deposition modeling (FDM).•3D printing parameters affect the electrochemistry of the printed electrodes.•Proof-of-concept using carbon black/polylactic acid filament.•Printing orientation, layer thickness, perimeter and speed are evaluated.•Electrochemical and Raman spectroscopy data revealed the best printing conditions. Thermoplastic filaments containing conductive carbon materials have contributed tremendously to innovations in the scientific scenario, however, the high charge transfer resistance of available materials sets a challenge for the development of 3D-printed electrochemical sensors. To solve this problem, several research groups have proposed chemical and physical post-treatments that are time-consuming and affect the structural integrity of materials. Herein, we systematically investigated the influence of printing parameters (orientation, layer thickness, number of perimeters and printing perimeter speed) on the electrochemical performance of sensors. For these studies, 3D-printed electrodes (rectangular shape) were printed using an affordable filament of carbon black integrated in polylactic acid (CB/PLA), and measurements by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) using 10 mmol/L [Ru(NH3)6]2+/3+ as redox probe were performed. The results showed that electrodes printed under vertical orientation, with lower layer thickness (0.05 mm) and print perimeter speed (30 mm s−1) using two perimeter numbers provided the best electrochemical performance (faradaic peak current intensity and lower peak-to-peak separation). To understand the improvement of electrochemical responses, experiments by Raman spectroscopy and multivariate curve resolution by alternating least squares (MCR-ALS) were carried out which showed greater availability and distribution of conducting sites under the selected conditions. Thus, it can be inferred that 3D-printing parameters are important features to allow the manufacture of improved carbon electrochemical platforms.