Synthesis of inherently helical nanofibers: Effects of solidification of electrified jet during electrospinning

• Published in: Journal of applied polymer science Vol. 139; no. 24
• Main Authors: Yoon, Jihyun, Myung, Jun Ho, Kim, Yong‐Min, Jeon, Seung‐Yeol, Sun, Jeong‐Yun, Yu, Woong‐Ryeol
• Format: Journal Article
• Language: English
• Published: Hoboken, USA John Wiley & Sons, Inc 20.06.2022; Wiley Subscription Services, Inc
• Subjects: Addition polymerization; Charge density; Electric fields; Electrospinning; helical fibers; high evaporation; Materials science; Metal ions; Nanofibers; Polymers; Rapid solidification; Solidification; Solvents; Spinnerets; Vapor pressure
• ISSN: 0021-8995; 1097-4628
• DOI: 10.1002/app.52352

In this paper, a helical fiber was fabricated through electrospinning by increasing the vapor pressure of the solvent, increasing the conductivity of the polymer solution and forming an uneven electrical field distribution around the jet. Fiber morphology during electrospinning of a dielectric polymer solution was observed to dramatically change from straight to helical due to rapid solidification of the jet as vapor pressure of the solvent increased. A similar effect was observed with conductive solutions prepared by adding large amounts of metal ion to the polymer solution. The addition of metal ion induced strong electrical stresses, causing the electrified jet to rapidly solidify in the early stage of electrospinning. Simulations revealed that the jet near the nozzle tip was subject to a strong electrical field due to increased charge density. The thickness of the emerging fiber was rapidly reduced with fast and simultaneous solidification, resulting in helical nanofibers. In addition, by using the asymmetric spinnerets, an uneven electric field distribution around jet was generated, maximizing the fiber curvature and increasing the helical fiber ratio.