A rail-to-rail high speed comparator with LVDS output in 0.18-μm SiGe BiCMOS Technology

• Published in: Integration (Amsterdam) Vol. 97; p. 102198
• Main Authors: Sun, Qiyan, Tu, Ruiyong, Xie, Jin, Gong, Yihong, Wu, Sini, Li, Jinghu, Luo, Zhicong
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.07.2024
• Subjects: High speed comparator; Input overdrive; LVDS; Propagation delay; Rail-to-rail; High speed comparator; LVDS; Input overdrive; Rail-to-rail; Propagation delay
• ISSN: 0167-9260; 1872-7522
• DOI: 10.1016/j.vlsi.2024.102198

Achieving low propagation delay in comparators under low input overdrive voltage is challenging. To overcome this difficulty, this paper presents a novel rail-to-rail high-speed comparator. By clamping the output node of the current summation circuit relative to a fixed level VC, the overdrive recovery time under large signal is successfully reduced. Moreover,by adopting a cascaded approach with multiple stages of high bandwidth and low gain,not only is the comparator’s gain enhanced,but it also acquires higher bandwidth. Ultimately, the comparator’s output is transmitted at high speed through an LVDS interface. This design is implemented using 0.18μm SiGe BiCMOS technology. Simulation results show that the comparator has a static power consumption of 26.4 mW, and for 5 mV input overdrive, the average propagation delay is about 1.09 ns. •The input common-mode range is expanded to rail-to-rail.•The propagation delay under small input overdrive is greatly reduced.•The static power consumption of the comparator is 26.4 mW.•The comparator’s output is transmitted at high speed through an LVDS interface.•The comparator is implemented using 0.18 μm SiGe BiCMOS technology.