Effect of green synthesized zinc oxide nanoadditives and rice bran oil biodiesel blend on performance and combustion characteristics of a variable compression ratio diesel engine: an experimental study

• Published in: Biofuels, bioproducts and biorefining Vol. 17; no. 6; pp. 1595 - 1610
• Main Authors: Koirala, Manish, Sah, Amit Kumar, Dhakal, Rabindra Prasad, Karn, Rupesh Lal, Khanal, Mukunda, Adhikari, Surya Prasad
• Format: Journal Article
• Language: English
• Published: London Wiley Subscription Services, Inc 01.11.2023
• Subjects: Additives; Analytical methods; Biodiesel fuels; Biofuels; Brakes; Calorific value; Catalysts; Cetane number; Chemical synthesis; Combustion; Compression; Crystal structure; Cylinders; Diameters; Diesel; Diesel engines; Energy consumption; Engine tests; Fourier transforms; Fuel consumption; Fuels; Heat transfer; Hydroxides; Infrared spectroscopy; Nanomaterials; Nanoparticles; Oil; Peak pressure; Physicochemical processes; Physicochemical properties; Plant extracts; Potassium; Potassium hydroxide; Potassium hydroxides; Rice; Rice bran oil; Thermodynamic efficiency; Toxicity; Transesterification; Variable compression ratio; Viscosity; Wurtzite; Zinc; Zinc oxide; Zinc oxides
• ISSN: 1932-104X; 1932-1031
• DOI: 10.1002/bbb.2527

Abstract The aim of this research was to investigate experimentally the performance and combustion characteristics of a four‐stroke, single‐cylinder, water‐cooled variable compression ratio diesel engine using rice bran oil biodiesel blends with zinc oxide nanoparticles. Rice bran oil biodiesel was prepared using a transesterification reaction with a 6:1 methanol‐oil molar ratio and 1% w/w potassium hydroxide as catalyst. Zinc oxide nanoparticles were synthesized using a green method incorporating Psidium guajava leaf extract as a capping agent to reduce precursor use and to reduce the toxicity of the nanomaterial. The synthesized zinc oxide nanoparticles were characterized by using X‐ray diffraction and Fourier‐transform infrared spectroscopy to confirm the formation of highly crystalline pure zinc oxide nanoparticles with a hexagonal wurtzite crystal structure with an average diameter of 20.963 nm. Rice bran‐oil biodiesel‐diesel blend was prepared by volumetrically mixing 20% biodiesel and 80% mineral diesel and was considered as a base fuel for comparison. Zinc oxide nanoparticles were diffused in the base fuel at dosage levels of 25, 50, and 75 ppm, with the aid of ultrasonication. Measurement of the major physicochemical properties of test fuels showed an increase in the cetane number and calorific value and a reduction in viscosity with an increase in the zinc oxide concentration. The overall properties of all the test fuels were found to be similar in comparison with commercial diesel. An experimental engine test was carried out under different loading conditions with a constant speed of 1500 RPM and two different compression ratios – that is, 17.5:1 and 15:1. Among all the test fuels at both compression ratios, engine performance and combustion properties improved with an increase in the zinc oxide concentration. Test fuel with 75 ppm of zinc oxide additive at 17.5 compression ratio resulted in an overall improvement at full load: brake thermal efficiency increased by 2.45%, brake specific fuel consumption reduced by 5.45%, cylinder peak pressure increased by 3.27% and net heat release increased by 10.32% in comparison with base fuel.