Experimental Investigation on the Effect of Laser Welding Parameters for P91 Steel Welding with Varying Shielding Gas Using Box–Behnken Design Methodology

• Published in: Arabian journal for science and engineering (2011) Vol. 48; no. 3; pp. 2715 - 2735
• Main Authors: Rakesh, S., Raghuraman, S., Venkatraman, R.
• Format: Journal Article
• Language: English
• Published: Berlin/Heidelberg Springer Berlin Heidelberg 01.03.2023; Springer Nature B.V
• Subjects: Adequacy; Argon; Atmospheres; Bead on plate welding; Carbon dioxide; Chromium molybdenum steels; Columnar structure; Delta ferrite; Engineering; Ferritic stainless steels; Fiber lasers; Heat affected zone; Humanities and Social Sciences; Laser beam welding; Lasers; Martensite; multidisciplinary; Penetration depth; Research Article-Mechanical Engineering; Science; Variance analysis; Welded joints; Welding machines; Welding parameters; Shielding gas; Underfill; Box–Behnken; Fiber laser welding; Top bead width; Depth of penetration; Heat-affected zone; P91 steel
• ISSN: 2193-567X; 1319-8025; 2191-4281
• DOI: 10.1007/s13369-022-06979-z

In the current experiment, the fiber laser parameters were optimized for welding P91 steel using the Box–Behnken design (BBD). Bead-on-plate welds were produced with an 8000 W fiber laser welding machine, with the focal point, power, and welding speed of the laser varied under various shielding atmospheres. The input parameters were optimised to achieve the desired depth of penetration (Dp), underfill (U), top bead width (Tw), and heat-affected zone width (Hw), and their impact on output responses were analyzed using the analysis of variance (ANOVA). The results of bead-on-plate trial welds and analysis of variance demonstrated that welding speed has the most decisive influence on the depth of penetration (Dp), the width of top bead (Tw), and HAZ (Hw), while laser power has the most significant influence on underfill (U). The optimal solution for argon shielding resulted in a weld with a penetration depth of 5.5 mm, compared to full penetration weld with a narrow top bead and heat affected zone achieved in CO 2 shielding atmosphere. The results of validation trials utilising the optimal parametric combination were found to be highly correlated with the expected values, confirming the mathematical model's adequacy. The high laser intensity used in CO 2 shielding resulted in the formation of underfill with a depth of 0.456 mm. In both shielding atmospheres, the fusion zone microstructure exhibited untempered martensite in as-welded condition with a columnar lath structure and was devoid of δ-ferrite.