Modeling of a heat-integrated biomass downdraft gasifier: Influence of feed moisture and air flow

• Published in: Biomass & bioenergy Vol. 187; p. 107282
• Main Authors: Haidar, Houda M., Butler, James W., Lotfi, Samira, Dieu Vo, Anh-Duong, Gogolek, Peter, McAuley, Kimberley
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.08.2024
• Subjects: Biomass; Downdraft gasifier; Gasification; Heat integration system; Simulations; Model; Simulations; Gasification; Biomass; Heat integration system; Downdraft gasifier
• ISSN: 0961-9534; 1873-2909
• DOI: 10.1016/j.biombioe.2024.107282

A model for a heat-integrated biomass downdraft gasifier is developed and used to study the influence of changes in biomass moisture content and gasifier air flow. This one-dimensional steady-state model accounts for pyrolysis, combustion and gasification reaction kinetics as well as transport phenomena occurring within the gasifier and heat integration system. The gasifier is divided into four zones for solving the ordinary differential equations (ODEs), because each zone has different geometry for the reactor or heating system. The material and energy balance ODEs are solved as a boundary value problem (BVP), ensuring that conditions for the producer gas at the bottom of the reactor match the conditions of the countercurrent annulus gas, which is used for heating. The model also accounts for the preheating of the biomass using exhaust gas from an associated engine used to generate electricity from the producer gas. The model predicts the process gas temperature, flow rate and composition and was validated using two experimental runs with different control inputs. The model predictions show good agreement with the data. Simulations with the highest feed moisture result in lower reactor temperatures and simulations with the highest air flow result in the highest reactor temperatures. [Display omitted] •Steady-state model for a heat-integrated biomass downdraft gasifier is developed.•Model accounts for pyrolysis, combustion and gasification reactions.•Gasifier is divided into four zones to account for geometry and heat integration.•Ordinary differential equations are solved as a boundary value problem.•Model is tested using operating data and used to study effects of reactor inputs.