Friction stir welding of oxide dispersion strengthened platinum alloy

The FSW of an oxide dispersion strengthened platinum alloy using an Ir-based alloy tool was performed. When the welding temperature during FSW was lower than the annealing temperature, abnormal grain growth was seen in the joint after annealing. On the other hand, the microstructure of the joint aft...

Full description

Saved in:
Bibliographic Details
Published inQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 30; no. 1; pp. 24 - 28
Main Authors MIYAZAWA, Tomoaki, IWAMOTO, Yuichi, MARUKO, Tomohiro, FUJII, Hidetoshi
Format Journal Article
LanguageJapanese
English
Published JAPAN WELDING SOCIETY 2012
Subjects
Alloy plating
Annealing
Dispersions
Friction stir welding
Grains
Iridium based alloy tool
Mechanical properties
Microstructure
Oxide dispersion strengthened platinum alloy
Oxides
Platinum base alloys
Welding
Online AccessGet full text

Cover

More Information
Summary:The FSW of an oxide dispersion strengthened platinum alloy using an Ir-based alloy tool was performed. When the welding temperature during FSW was lower than the annealing temperature, abnormal grain growth was seen in the joint after annealing. On the other hand, the microstructure of the joint after annealing maintained finer grains when the welding temperature was higher than the annealing temperature. When the finer grain was maintained, the hardness of the joint after annealing was the same as before annealing and the tensile specimens fractured at the base metal part at room temperature. However, the tensile specimens fractured at stir zone with a large deformation during the high temperature tensile test at 1500°C.
Bibliography:ObjectType-Article-2
SourceType-Scholarly Journals-1
ObjectType-Feature-1
content type line 23
ISSN:0288-4771
2434-8252
DOI:10.2207/qjjws.30.24