Microstructure and Wear Resistance of FeNiCrMnCu High Entropy Alloy

• Published in: Advanced Materials Research Vol. 1143; pp. 3 - 6
• Main Authors: Carcea, Ioan, Buluc, Gheorghe, Rusu, Oana, Chelariu, Romeu, Florea, Iulia
• Format: Journal Article
• Language: English
• Published: Zurich Trans Tech Publications Ltd 01.02.2017
• Subjects: Alloying elements; Copper; Entropy; Friction; Iron; Nickel; Solid solutions; Wear resistance; Wear Resistance; High Entropy Alloys; Hardness; Microstructure
• ISBN: 9783035710694; 3035710694
• ISSN: 1022-6680; 1662-8985; 1662-8985
• DOI: 10.4028/www.scientific.net/AMR.1143.3

In this paper it is presented the microstructure and wear resistance of FeNiCrMnCu high entropy alloy. High entropy alloys are composed by at least five metallic elements in equimolar or non-equimolare proportions. High entropy alloys a brand new category of metallic materials, appeared to be a new effort in materials science and engineering, which attracted great interest. To obtain FeNiCrMnCu high entropy alloy we used an 8000 Hz induction furnace. The chemical composition was determined by EDAX. Microstructural analysis was performed using optical microscopy and SEM (scanning electron microscopy), which showed that the FeNiCrMnCu high entropy alloy has a dentritic structure and form a solid solution. Choosing copper as the main element (copper tends to segregate in interdentritic region due to its positive enthalpy of mixing with many common elements) [1], along with the iron, nickel, chromium and manganese, led to obtaining a dentritic structure specify for solid solution, which, however, did not lead to a significant hardness for FeNiCrMnCu high entropy alloy. In this work we selected pure metallic elements like: Fe, Ni, Cr, Mn and Cu. The quantity of alloy developed has 1.5 kg. Friction and wear resistance were the studied by using a reciprocating sliding test machine, in a pin on disk configuration, using aluminum as counter face. Hardness value regarding FeNiCrMnCu high entropy alloy was 184 HV and medium friction coefficient value for FeNiCrMnCu high entropy alloys was 0.86 for 28 minutesc and 1.13 for the first 20 seconds.