Preparation and characterization of Sr0.09Ce0.91O1.91, SrCeO3, and Sr2CeO4 by glycine–nitrate combustion: Crucial role of oxidant-to-fuel ratio

• Published in: Journal of materials research Vol. 19; no. 11; pp. 3181 - 3188
• Main Authors: Chavan, S.V., Tyagi, A.K.
• Format: Journal Article
• Language: English
• Published: New York, USA Cambridge University Press 01.11.2004
• Subjects: Combustion synthesis; Nanoparticle; Transmission electron microscopy (TEM); Combustion synthesis; Nanoparticle; Transmission electron microscopy (TEM)
• ISSN: 0884-2914; 2044-5326
• DOI: 10.1557/JMR.2004.0411

The title compositions were prepared by the gel-combustion process using glycine as the fuel and the corresponding metal nitrates as oxidants. The powders after calcination at 600 °C were characterized by x-ray diffraction for phase identification. The lattice parameters were refined by least squares method for each of the title compounds. Sr0.09Ce0.91O1.91 could be prepared in situ, that is, without any further external heating at higher temperatures, whereas phase pure SrCeO3 and Sr2CeO4 could be prepared only after calcination at 950 °C for 3 h. Sr0.09Ce0.91O1.91 was prepared using three different oxidant-to-fuel ratios: the fuel-deficient ratio, the propellant chemistry (stoichiometric) ratio, and the fuel-excess ratio. The crystallite size as calculated by x-ray line broadening was found to be 13 nm, 20 nm, and 42 nm for the products from fuel-deficient, propellant, and fuel-excess ratios, respectively. It was found that the extreme fuel-deficient ratio of 1:0.5 failed to give phase pure Sr0.09Ce0.91O1.91. The transmission electron microscopy studies showed that majority of the particles were in the range 80–100 nm and 200–250 nm for SrCeO3 and Sr2CeO4, respectively. The compositional characterization was done by energy dispersive x-ray. A careful control of the oxidant-to-fuel ratio was found to be necessary to get the desired products, due to their different thermodynamic stabilities. Thus, the versatility of combustion process in synthesizing the products with different thermodynamic stabilities has been shown, which was hitherto unexplored.