Theoretical analysis of the mechanical response of a lined canal induced by soil frost heave behavior based on improved foundation beam models

• Published in: Cold regions science and technology Vol. 225; p. 104252
• Main Authors: Jiang, Haoyuan, Zhang, Mingyi, Wang, Zhengzhong, Gong, Jiawei, Sun, Xinjian
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01.09.2024
• Subjects: Analytical solution; Elastic foundation beam model; Frost heave; Frozen soil-lining interaction; Lined canal; Frost heave; Elastic foundation beam model; Frozen soil-lining interaction; Analytical solution; Lined canal
• ISSN: 0165-232X; 1872-7441
• DOI: 10.1016/j.coldregions.2024.104252

Lined canals in cold regions often experience severe frost damage, posing a significant threat to the water supply safety. This paper proposes a modified analytical solution for the response of canal lining under soil frost heave, which is based on a Timoshenko beam on a Pasternak foundation considering tangential contact between the lining and frozen soil. This analytical solution can provide any solution using Timoshenko or Euler–Bernoulli beams on Pasternak or Winkler foundations with or without tangential contact. Then, the modified analytical solution, along with the traditional analytical solutions using Euler–Bernoulli beams on Winkle foundations, is compared against both model test and numerical simulation results. The modified analytical solution performs better than the traditional solution. Finally, the effects of foundation model, beam model, and tangential contact in simulating canal frost heave were discussed, and some measures to mitigate canal frost heave are proposed. The results show that solutions based on Winkler foundation overestimate frost heaves and tensile stresses of canal linings, and solutions without considering tangential contact only obtains overestimated frost heave. In addition, solutions based on Euler–Bernoulli beams underestimate frost heaves slightly and overestimate tensile stresses slightly. Therefore, the Pasternak foundation, Euler–Bernoulli beam, and tangential contact model can be used to simulate canal frost heave. The modified analytical solution directly uses field measurements of soil free frost heave to calculate canal frost heave, thereby enhancing result reliability. This analytical solution provides a simple method for canal frost heave design, and can be applied to frost heave analyses of flat and inclined structures. [Display omitted] •Propose analytical solution considering shear effects of the lining, frozen soil, and their tangential contact.•Perform model test and numerical simulation to verify the accuracy of the analytical solution.•Discuss the applicability of foundation and beam models on simulating canal frost heave.•Factors studied include the shear layer stiffness, and normal and tangential contact conditions.